HOME | CONTACT | SUPPORT | SITE MAP
44 Hull Street • Randolph, VT 05060
802-728-4533 • info@leddynamics.com

Quality Control Engineer

Job Description

 

Quality Control Engineer – reporting to the Director of Operations, responsible for the coordination of quality initiatives to produce emerging LED technology components and products. Initiate and oversee programs in manufacturing, supply chain, engineering and new products introduction to ensure product quality is achieved.

 

Quality Control Engineer’s Job Duties:

  • Champion product quality goals in manufacturing daily by leading and establishing initiatives that will provide effective, repeatable results.
  • Collect data and monitor quality yields and production issues effecting quality and cost. Establish and maintain with manufacturing team an effective reporting process for loss and rework.
  • Create an operational excellence culture by training employees; promoting safety and housekeeping: passionate in documenting processes and providing customers with quality products.
  • Promote advance quality control programs (FMEA, DFM/DFA, 1ST article) in manufacturing and engineering to enhance quality creating a customer-focused culture within LEDdynamics.
  • Work with engineering to identify root cause, develop corrective action plans and implementation to prevent reoccurrence of “off quality” events.
  • Minimize quality risk by engaging engineering and sales team with new product reviews assessing production capabilities with customer expectations. .
  • Responsible for ensuring applicable documents and test procedures for assemblies are available use on production floor.
  • Develop and manage in-house assembly and test fixture programs including calibration record keeping.
  • Provide management with statistical data showing trends in production including corrective action plans to improve quality and recommending strategic quality “points of control”.
  • Chairperson for Material Review Board (MRB), contributor to field returns disposition (RMAs) and approver of Engineering Changes Orders (ECOs) as Quality Representative.
  • Assist procurement team by providing sufficient information and defective samples as needed and working with supplies to address supplier quality concerns.
  • Point person for 3rd party production quality documentation showing LEDdynamics’ compliance with established policies and procedures.
  • Provide management with recommendations for operational improvements such capital expenditures and cost reduction opportunities.
  • Identifies and resolves issues by analyzing data; investigating issues; identifying solutions; recommending and implementing corrective action.
  • Contributes to the LEDdynamics’ team effort as needed.

 

Skills and Qualifications:

  • Prior experience with light electronic manufacturing and SMT board assembly.
  • Understanding of product specifications and tolerances.
  • Familiar with IPC-A-610 workmanship specifications.
  • Formal technical training (degree preferred) and ability to work with minimum supervision.
  • Experience/knowledge of LEAN manufacturing and concepts.
  • 3+ years with responsibility in meeting quality goals within a discrete manufacturing environment, creating control plans: demonstrated experience to work with others to reach consensus.
  • Computer skills and ability to maintain and analyze production data reporting using manufacturing software products and Excel.
  • Demonstrated hands on leadership experience with facilitating teams for process improvement activities and leading the development of SOPs and work instructions.
  • Strong communication skills: written, verbal and presentation to all levels within LEDdynamics.
  • Demonstrated ability to work cross functionally and with suppliers to influence change.
  • Committed to leading a team to achieve excellence in manufacturing in a small, growth oriented environment.
News & Events
We'll also be exhibiting at LightFair being held at the Philadelphia Convention Center in Philadelphia on May 9th, 10th, and 11th.  Our booth number is: 122.  #LFI201[...]
We'll also be exhibiting at the Made in Vermont Marketplace at the Champlain Valley Exposition Center April 1stand 2nd.  Our booth number is: 201. http://www.madeinvermontmark[...]
We will be exhibiting at LEDucation March 28th and 29th in the New York Hilton Midtown in NYC.  Our booth number is: AH 1216. http://www.leducation.org/conference-details.html[...]
We will be at the Vermont Chamber Business And Industry Expo 2016, at the Sheraton in Burlington.  Our booth number is #14.  If you are in the area and wo[...]
« LIST ALL RSS FEED
Professor's Blog
The United States Environmental Protection Agency (EPA) recently published the new Energy Star Luminaire Specifications version 1.0 draft 1  and requested industry feedback. The [...]
This YouTube video features our tough DockLED light fixture designed for for extreme punishment in loading docks. We don't recommend beating on the product as a measure for stress relief, ho[...]
« LIST ALL RSS FEED
F A Q
What do you charge for research & development on a custom project? Each custom project requires an individual quote for development. Please contact us with details of your project needs[...]
What is the best LED driver for my application? That depends on the application. For example... (more…)[...]
Do I need an electrician to install EverLED-TRs in my existing fluorescent fixtures? No, the EverLED-TR replacement tubes work with the ballast in your existing fixture, so all you have to [...]
Is LEDdynamics a public corporation? No, LEDdynamics is a privately held corporation. (more…)[...]
« LIST ALL RSS FEED
News Letter
Sign up for our
email newsletter